CNC Lathes:

Daewoo Puma 200, 8″ Chuck, 20″ between centers, 13″ Max turning Diameter
Daewoo Puma 10S, 12″ Chuck, 40″ between centers, 15″ Max turning Diameter
Daewoo Puma 400 LB, 21″ Chuck, 80″ between centers, 22″ Max turning Diameter
Daewoo Puma 400 LB, 21″ Chuck, 80″ between centers, 22″ Max turning Diameter
Daewoo Puma 400 B, 21″ Chuck, 44″ between centers, 22″ Max turning Diameter
Hwacheon Hi-Tech 700, 25″ Chuck, 79″ Between centers, 25″ Max turning diameter

CNC Vertical Mills:

Johnford 1600 HD, 70″ x 29.5″ Table, 50 Taper, 20 Tool capacity, 12″ 4 Axis
Johnford 1600 HD, 70″ x 29.5″ Table, 50 Taper, 20 Tool capacity, 10″ 4 Axis
Daewoo DMV, 42″ x 17.0″ Table, 40 Taper, 20 Tool capacity, 8″ 4 Axis
Bridgeport, 9″ x 42″ Table, ACU-RITE 3 Axis CNC Control

CNC Horizontal Mills:

OKK HM-40, 19″ x 19″ Table, 40 Taper, 40 Tool capacity
Makino A77, Makino Horizontal Machining center, with dual 25″ pallets and full 4th axis, 40 Tool capacity. High speed surfacing for mold making

CNC Wire EDM:

Agiecharmilles Cut P20, 13.8″ x 9.8″ x 8.0″ Travel
Agiecharmilles Cut P30, 23.622″ x 15.748″ x 13.779″ Travel

Manual Equipment:

Warner Swaysey 3A Turret Lathe, 20″ chuck, 60″ bed length.
Kingston HD-2290 Engine Lathe, 12″ chuck, 90″ between centers
Comet Knee Mill, 9″ x 42″
12″ Diameter Capacity, 0″-40″ Single stroke shuttle with bundle operation for multi part cutting.

Saw:

HYD-MECH, 12″ Diameter Capacity, 0″-40″ Single stroke shuttle with bundle operation for multi part cutting.

Programing System:

Master Cam, Turning, Milling, and EDM

Hardness Testers and Equipment:

Wilson Rockwell Tester
King Brinell Tester
King Scan Brinell Reader

Measuring Equipment:

Brown & Sharp Micro Excel CMM, 20″ x 20″ x 20″ Inspection Cube.
Mitutoyo Optical Comparator, 12″ with surface Illuminator.
Fowler Trimos Mic-Trac, 0″ x 40″ Length.
OD Micrometers, 1″ to 40″.
ID Micrometers, 1″ to 52″.
Three Point Micrometers, .8″ to 10″.
Surface Plate, 90″ x 60″ Grade B
Surface Plate 72″ x 60″ Grade B
Surface Plate 24″ x 36″ Grade A
Surface Plate, 24″ x 36″ Grade A
Gage Pins, .011″ to 1.0″

Various other equipment